Fulflo

Contact PersonDavid Locaputo
Phone937x-783x-2411
View WebsiteView Website
Contact FormContact Form
Send EmailSend Email
Submit RFPSubmit RFP/RFI

459 E Fancy Street
Blanchester, OH 45107
USA
 
Fulflo
 



Fulflo was established in 1912 and is celebrating it's 105th anniversary. Located in Blanchester, OH, Fulflo was incorporated in 1933 under it's present name and trademark. Patents for the original guided piston, direct acting relief valve were obtained in 1935, coincident with the onset of fluid power systems. The need for providing large flows without excessive bulk was subsequently met by the pilot-valve-control relief valve which was patented in 1943.

Fulflo parts and valves are used in oil and gas refineries, are essential to the military including ships and aircraft carriers, and even provide fun for attendees on amusement roller coaster rides.


Fulflo V-Series Hydraulic Bypass Relief Valves:

 

  • Standard with Screw Connections
  • Standard with Flange Connections
  • Stainless Steel with Screw Connections
  • Handwheel with Screw Connections
  • Handwheel with Flange Connections in a choice of brass, cast iron, steel, and stainless steel

The Fulflo V-Series valves range in size from 3/8" - 2" and operate with liquids of any viscosity at pressures from 2 - 1000 p.s.i. The valves are adjustable, mount in any position, and allow for flow rates up to 150 GPM.
"V" Series valves are ideally suited in hydraulic and lubricating systems for load regulation and system protection. Our valves are for liquids only, no air gas or steam, but we can also offer specialized valves for your specific application. Contact our Engineering Dept. at 937-783-2411 for more details.

Click for more info

Fulflo FV2000 Series Hydraulic Bypass Relief Valvesare similar to the V-Series valve and includes a new safer design that protects liquid and gasses from venting out of the valve during normal operation and adjustment conditions. This valve has been especially designed to prevent the adjusting screw from backing out while making adjustments to the pressure setting. An o-ring has been incorporated around the adjusting screw to further prevent liquid from escaping.

The Fulflo FV-Series valves range in size from 3/8" - 2" and operate efficiently with liquids of any viscosity at pressures from 2 - 1000 p.s.i. The FV-Series valves are available in flange or screw type in a choice of brass, cast iron, steel, and stainless steel. They can be mounted in any position.
"FV" Series valves are ideally suited in hydraulic and lubricating systems for load regulation and system protection. Our valves are for liquids only, no air gas or steam. Special trim or packings are available for use with fire resisting fluids and other liquids of this type. We can also offer specialized valves for your specific application. Contact our Engineering Dept. at 937-783-2411 for more details.

Click for more info.

Fulflo A-Series Hydraulic Bypass Relief Valvesfeature both direct acting and internal pilot operated models with either screw or flange type connections. The threaded valves are available in 2-1/2" or 3" sizes in either cast iron or steel. The flange type valves also include a 4" model and may be specified with 150#, 300# or 600# ANSI flanges. Note that 600# is available in steel and stainless steel only.

The direct acting valves operate at pressures to 150 p.s.i.; the internal pilot operated models at pressures to 500 p.s.i. All operate with liquids of any viscosity. The valves mount in any position and offer chatter free performance.

"A" Series valves are ideally suited in hydraulic and lubricating systems for load regulation and system protection. Our valves are for liquids only, no air gas or steam, but we can also offer specialized valves for your specific application. Contact our Engineering Dept. at 937-783-2411 for more details.
The A-Series is a workhorse valve that has been tried and tested over time. The green A-Series valve above was manufactured almost 100 years ago.

Click for more info.

Fulflo SVB-Series Hydraulic Bypass Relief Valvesare Underwriter Listed, range in size from 3/8" - 1" and operate efficiently with liquids of any viscosity at pressures from 7 - 500 p.s.i. The SVB valves are of brass construction with threaded connections.

Primarily designed for use with fuel oils on oil burner service, the SVB valves may be used whereever Underwriter Listed valves are required. Each valve is pre-set to the specified pressure and is equiped with a limiting device to prevent over-adjustment. The valves can be mounted in any position. Our valves are for liquids only, no air gas or steam, but we can also offer specialized valves for your specific application. Contact our Engineering Dept. at 937-783-2411 for more details.

Click for more info.

Fulflo O V-Series Hydraulic Bypass Relief Valves:

  • Standard with Screw Connections
  • Standard with Flange Connections
  • Stainless Steel with Screw Connections in a choice of brass, cast iron, steel, and stainless steel. They are a backpressure control valve.

The Fulflo O V-Series valves range in size from 3/8" - 2" and operate with liquids of any viscosity at pressures from 2 - 1000 p.s.i. The valves are adjustable, mount in any position, and allow for flow rates up to 150 GPM.

"OV" Series valves are ideally suited in hydraulic and lubricating systems for load regulation and system protection. Our valves are for liquids only, no air gas or steam, but we can also offer specialized valves for your specific application. Contact our Engineering Dept. at 937-783-2411 for more details.

Click for more info.




 
Visit our website: www.fulflo.com/
 
Fulflo | 459 E Fancy Street Blanchester, OH 45107 USA | 937x-783x-2411
 
 
 
 
This listing can be found in the following categories: